If you’re remodeling a commercial space in Utah, ADA compliance almost always comes into play. The areas you’re renovating generally need to meet accessibility standards, and depending on the scope, that requirement can extend to the path leading to those areas too.

Planning a remodel is exciting, but it’s easy to overlook the accessibility rules that come with it. Whether you’re updating a restaurant dining room, reconfiguring an office, or refreshing a retail storefront, the Americans with Disabilities Act (ADA) has something to say about it.

Once you understand how these rules work, they’re not nearly as intimidating as they sound. Let’s break down what counts as an alteration, when ADA compliance kicks in, and what upgrades you might need to budget for.

What Counts as an “Alteration” Under the ADA?

Many business owners think ADA rules only apply to brand-new construction. In reality, the ADA defines “alteration” much more broadly, covering most changes that affect how a space looks, works, or is used. Common examples include:

  • Remodeling or renovating an existing space
  • Moving or adding interior walls
  • Changing a retail or office layout
  • Replacing certain types of flooring
  • Reconfiguring customer or employee areas
  • Making structural changes to the building

Does Remodeling Mean My Entire Building Has to Become ADA Compliant?

Usually, no. You don’t need to bring your whole building up to code just because you’re updating one area.

Generally, only the specific area being altered needs to meet ADA compliance standards, and it needs to comply to the maximum extent feasible given the space and budget constraints. The rest of your existing building typically isn’t affected unless it connects directly to what’s called a “primary function area” (more on that below).

  • The Area Being Remodeled: Needs to meet ADA standards
  • The Rest of the Existing Building: Generally unaffected, in most cases
  • Additional Upgrades: May be required if the remodel affects a primary function area

What Is a Primary Function Area (and Why Does It Matter)?

A primary function area is any space where the main activities of your business happen. This could be the dining room of a restaurant, the sales floor of a retail store, the main offices, or a bank lobby. Remodeling a primary function area can trigger extra accessibility requirements beyond just that one room.

Areas that generally aren’t considered primary function spaces include storage rooms, mechanical rooms, and employee break rooms used only occasionally.

When Can a Remodel Trigger Upgrades Outside the Renovated Area?

If your remodel affects a primary function area, the accessible route leading to it may also need upgrades. You might hear this referred to as the “path of travel” requirement.

That means the path from the parking lot, the entrance, the hallways, and even the restrooms serving that area could all be subject to ADA compliance requirements. The goal is simple: someone with a disability should be able to actually reach and use the newly renovated space.

Common ADA Upgrades During Commercial Remodels

Depending on your project scope, here are some upgrades that often come up.

Entrances and Accessible Routes

  • Widened doorways
  • Lowered or leveled thresholds
  • Ramps where elevation changes exist

Doors and Hardware

  • Proper clearance for wheelchair access
  • Lever-style, easy-to-operate hardware
  • Correct mounting heights

Restrooms

  • Accessible stalls
  • Grab bars near toilets
  • Proper clearances and fixture heights

Parking and Exterior Access

  • Designated accessible parking spaces
  • Access aisles next to those spaces
  • Curb ramps connecting to sidewalks

Counters and Customer-Service Areas

  • Lowered counter sections
  • Clear floor space for wheelchair access

Signage

  • Tactile characters and braille
  • Proper mounting height for visibility and touch access

How Utah Building Codes Factor In

Utah adopts building codes that work with federal ADA requirements, so local permitting offices will often check both. That means your remodel plans need to satisfy state and city code officials, not just federal accessibility standards.

Because code requirements can vary slightly by city and change over time, it’s smart to loop in your local building department early. A quick conversation before construction starts can save you from costly rework later.

Frequently Asked Questions

Does a small remodel still trigger ADA requirements?

Yes, even small remodels can trigger ADA compliance requirements if they alter how a space is used or accessed. The scope of required upgrades typically scales with the size of the project, but it’s rarely safe to assume a small job is exempt.

Are older or historic commercial buildings exempt from ADA requirements?

Not entirely. Historic buildings may qualify for some flexibility if full compliance would threaten their historic character, but they’re still expected to meet accessibility standards wherever feasible.

Who pays for ADA upgrades in a leased space, the landlord or the tenant?

This depends on your lease agreement. Some leases assign responsibility to the tenant for improvements within their space, while landlords often cover common areas like entrances and restrooms. It’s worth clarifying this before your project begins.

Can ADA upgrades be phased instead of done all at once?

In some cases, yes. If full ADA compliance isn’t immediately feasible due to cost, phasing may be an option, though the specifics depend on your project and local code officials. Talk with your contractor and building department early to map out a realistic timeline.

Let Arnell-West Guide Your Next Remodel

Navigating ADA compliance during a commercial remodel doesn’t have to be stressful, especially with the right contractor by your side. Arnell-West has spent nearly 40 years helping Utah businesses remodel with confidence.

Ready to start planning your remodel the right way? Get in touch with Arnell-West today.